Honeywell’s 5806W3 is a 3V battery operated, photoelectronic smoke detector with a built-in wireless transmitter. It facilitates fire verification for false alarm reduction requirements by ANSI/SIA CP-01standards and is intended for use with any of Honeywell’s 5800 Series wireless receiver/transceivers for residential installations. The 5881ENHC or 5883H receivers are required for commercial installations.
Smoothing Algorithms Mathematical calculations in the detector’s software that minimize nuisance alarms by smoothing out short term spikes from dust and smoke.
Smart Check A signal is sent to the control panel when the detector requires cleaning. This allows a regular, non-emergency service call to clean the detector before it goes into alarm.
Drift Compensation Virtually eliminates nuisance alarms from long-term dust build-up by automatically adjusting the detector’s sensitivity.
Removable Detector Cover and Chamber Top Provides the technician the ability to quickly and easily clean the detector chamber without disassembling the detector head.
Approved UL Listings for Residential and Commercial Applications Both residential and commercial installation requirements are met.
Additional LED Status Indicators Identifying between alarm or trouble conditions is easier with green and red LED status indicators. The green LED denotes a normal condition while the red LED indicates an abnormal condition.
Easy-to-install Mounting Base The sturdy mounting base allows the detector to be more easily installed on uneven surfaces (i.e. stucco). The mounting base has larger mounting ports to accommodate drywall anchors for easy surface mounting.
Improved Robust RF Field Strength The distance between the detector and receiver has been significantly increased.
Additional Features:
Utilizes one long-life 3V lithium battery
Microcontroller runs on an 4.0 MHz clock
Horn operates at 3.3 KHz with sound pressure level of 85dBA at 10 feet